Please note: This also works for most plastic Clip in sunglasses too

If you have installation instructions from the manufacturer please follow those as techniques can vary from model to model.

Step 1: Install the clip on the outside lens into the arm side leaving the nose portion out.

Step 2: Bend the lens slightly to get the nose portion into the nose slot

Step 3: Push the lens in along the top portion of the rim so it snaps into place ensuring the nose and arm clips remain in their slots

Step 4: Inspect Lens and ensure no front bevels are showing along the rim and that the lens fits in the rim area along the nose and arm portions in their designated slots. If so you are done. If they aren't try to push and adjust the lenses into position or carefully remove the lens and start over at step 1

Please contact us if you have any concerns or are having any problems installing your new sunglass lenses from The Sunglass Fix.